The 719T Tilt Table Mortiser features heavy-duty cast iron construction and a powerful 1HP motor for the most demanding jobs. The head is mounted using adjustable gibs to assure years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35 deg. The table can also move left to right and forward and back on dovetail ways with the large handwheel controls. Adjustable linear stops and flip down stop allow for precision repeatability. The quick adjust clamp provides plenty of work-holding force and will swivel to accommodate angled workpieces. The heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories.

• Sturdy cast iron construction with precision-machined column and table
• Quick position table mounted swiveling vise clamp accommodates angled work pieces
• Feed lever features size positions allowing for quick adjustments
• Table and fence tilt from 0 to 35 deg for angled mortises
• Gas cylinder controlled rack and pinion system for smooth head raising and lowering
• Hinged chuck door allows easy access for quick bit changes
• Quick adjust depth stop for uniform mortise depths
• Provided 5/8", 3/4" and 1-1/8" bushings allow multiple chisel shank sizes
• Handwheels control smooth linear and cross table motions
• Adjustable work stop for repeat cuts

Chisel Stroke (In.)	10-3/4
Table Travel - Cross (In.)	4
Chisel Stroke Maximum (In.)
Chisel Capacity (In.)	1/4 - 1
Bushing Size (In.)	5/8, 3/4, 1-1/8
Table Size Fully Extended (L x W) (In.)
Recommended Circuit Size (Amps.)
Head Travel (Left to Right) (In.)
Motor Voltage (V.)	115, 230
Spindle Travel (In.)
Prewired Voltage (V.)	115
Chuck Distance to Base (In.)
Table Tilt (Deg.)	0 - 35
Maximum Work Piece Height (In.)
Chisel Center to Fence (In.)	4
Drilling Capacity (In.)
Head Travel (Front to Back) (In.)
Spindle Speed (RPM)	1,725
Spindle Distance to Base (In.)
Swing (In.)
Motor Power (HP)	1
Column Diameter (In.)
Fence Size (L x H) (In.)	4-1/2 x 20-1/4
Chuck Size (In.)	1/2
Spindle Taper	N.A.
Chuck Distance to Table (In.)
Spindle Distance to Table (Max.) (In.)
Base Size (In.)	14 x 16
Motor Current (Amps)	11, 5-1/2
Under Hold-Down (In.)
Table Travel - Longitudinal (In.)	15-1/2
Stand Height (In.)
Table Size (L x W) (In.)	7 x 20-1/4
Chisel Shank Capacity (In.)	5/8, 3/4, 1-1/8
Wiring Remarks
Style (Type)	Tilt Table