Honda WSP50AA Submersible Pump
$899.00
Honda WSP50AA Submersible Pump
- 1/2hp, 115V submersible trash pump
- 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
- Move slurry and dirty liquids without the worry of damaging the pump.
- Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
- 110 gal./min capacity
- Operates on continuous duty in temperatures of up to 104 deg, and intermittent duty up to 140 deg. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
- Solids handling up to 2.0"
- Move slurry and dirty liquids without the worry of damaging the pump.
- Lightweight, durable stainless steel casing
- The pump wont rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
- Automatic non-mercury float switch
- Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
- Built in thermal reset switch
- If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
- 25 foot heavy duty cord
- Side discharge
- Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.
- Operates fully or partially submerged
- Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
- Efficient air-insulated motor
- Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
- Pump Type - Submersible Trash pump
- Starting Type - Automatic
- Casing - Stainless Steel
- Motor (HP) - 1/2
- Voltage - 115
- Starting amps - 34
- Running amps - 8.3
- Duty - Continuous
- Motor insulation - Class F
- Overhead protection - Built-In Thermal Automatic Reset
- Discharge Type - Side
- Discharge capacity - 110 gpm
- Max. head (feet) - 32
- Port diameter ( inches) - 2.0 FNPT
- Maximum pressure - 14 psi
- Solids handling - 2.0"
- Impeller - Single Channel Stainless Steel
- Seals - Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower
- Cord length (feet) - 25
- Cord type - Heavy-Duty 115V
- Dimensions (WxH) - 9.0" x 21.5"
- Pump diameter - 9.0"
- Dry weight - 36 lbs.
Honda WSP50AA Submersible Pump
Recently Viewed
Honda WSP50AA Submersible Pump
$899.00 USD
Husqvarna 967854504 LT 6005 Rammer 9 in. Shoe
$3,994.00 USD
Husqvarna 967950801 LP9505 Trench Roller
$45,185.00 USD
Husqvarna 967855401 LG400 HONDA AC
$12,046.00 USD