SawStop ICS31230 3HP, 1ph, 230v Industrial Cabinet Saw
$6,059.00
Product Code: SAS-ICS31230
Fence Assembly
Motor Options
SawStop ICS Industrial Cabinet Saw
The SawStop Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10" cabinet saw available. The 5HP, 3ph, 230v configuration with a 36" Industrial T-Glide Fence Assembly offers the durability, versatility, and the peace of mind only SawStop's patented safety system can provide.
- SawStop Safety System - Automatically stops and retracts the blade on human contact.
- Strong and Smooth Fence System - A wide T-Style Fence and highly adjustable rail provides smooth movement along the length of the table
- Quick Release Zero-Clearance Insert - Features a quick-release mechanism for tool-free system access to saw cavity.
- 99% Efficient Dust Collection - Patent-pending over and under the table advanced airflow control system captures dust at the table and directs it out of the saw through dust collection port.
- Precision Alignment System - Adjust the blade and table alignment with precision not found on other saw.
- Large Start/Stop Paddle for Hands-Free Shut Off - It's easy to stop the blade even when both hands are occupied
- Tool-Free Quick Change Guard Mount - Make fast and easy transitions between blade and riving knife with no tools required
- Dust Collection Blade Guard - Low Profile guard collects above table dust and minimizes blade exposure.
- Quality Fit and Finish - Attention to detail, premium craftsmanship and rigorous engineering combine to create a saw you'll love to use.
SawStop Total Safety
The SawStop Industrial Cabinet Saw has several other features to help operators stay safe.
- SawStop safety system prevents serious injury with always-on protection.
- Now featuring 99% Dust Collection. The Centers for Disease Control has classified sawdust as a cancer-causing carcinogen. With an enhanced below-table blade shroud, the Industrial Cabinet Saw is a leader in dust collection.
- With the addition of the new Dust Collection Blade Guard, the Industrial Cabinet Saw captures 99% of generated dust. This innovative blade guard collects above-table dust and features independent lateral sides to minimize exposure to the blade. Its low profile allows for cuts as narrow as 3/4 of an inch.
- Riving knife minimizes kickback and provides protection during non-through cuts.
- No rough edges. The zero-clearance insert supports the wood throughout the cut and reduces tear-out and chip-out.
- We double-check the saw every time you turn it on. A diagnostic self-check runs when you start the saw to ensure all systems are ready to detect an accident.
- Sometimes you have your hands full and really need to stop the blade. Our large start/stop paddle with hands-free shutoff can be stopped with your knee allowing you to safely stop the blade even when both hands are busy. The paddle is located on the left side of the saw to minimize accidental shut off.
- Never worry again about someone using your saw when youre not around. The main power switch with lockout key prevents unauthorized users from operating the saw.
- When its closed, its closed. Accessing the inside of the cabinet is easy with two safety-interlocked doors. The safety interlocks ensure the motor wont start if either door is open.
- When the power goes out, the saw stays off. The safety system wont allow the motor to restart automatically when the power comes back on.
- Left-tilting blade helps prevent wood from binding against the fence.
SawStop Convenience
- Movement so smooth youll look forward to changing elevation. Gas assisted elevation adjustments provide incredibly smooth movement when raising and lowering the blade.
- Inconvenience is the enemy of safety. We made it easy to change between blade guard and riving knife with our tool-free blade guard quick change mechanism. Operators can make changes quickly with no tools required, minimizing disruptions to workflow.
- Measure once. Cut once. Getting the right measurement is easy with the magnified indicator lenses and smooth sliding surfaces on the T-Glide Industrial Series Fence.
- Cut anything " even conductive material. The safety bypass allows you to temporarily disable the braking system so you can cut conductive material. The bypass resets to safe mode as soon as the motor is turned off to prevent accidental use of the saw in bypass mode.
- Precision tuning. The cast iron table includes a precision alignment system that lets you align the miter slots and blade to the last thousandth of an inch.
SawStop Fit & Finish
- Flawless out of the box. Each saw is inspected and adjusted until it meets our stringent quality standards before it leaves the manufacturing floor. Our 205-point inspection assures that your saw arrives to you properly aligned and ready for use.
- Steady and adjustable. The widely spaced trunnion assembly contains 20% more iron than other cabinet saws, providing solid stability to reduce vibration. With easy-to-access adjustments for blade alignment and tilt, its a snap to fine-tune your saw.
- True vertical alignment. Our elevation system operates on a vertical slide rather than on an arc providing you with repeatability and consistent alignment. Blade height is proportional to handle turns at all elevations.
- No workout in your workshop. The 8-inch chrome plated adjustment wheels look and feel great. The wide wheel radius gives you extra leverage to make small adjustments easily.
- Dual, poly-V ribbed belt drive reduces vibration. The second belt isolates the arbor from the motor reducing the effect of harmonic vibration that can occur at certain motor speeds. The result is smooth operation throughout the cut.
- No more rocking the fence. Our widely spaced glide plates and adjustable rail provide smooth travel up and down the extension table.
- No job too hard. Available with 3 HP, 5 HP and 7.5 HP three-phase motors that easily cut through the thickest hardwoods.
SawStop Durability
- The widely spaced trunnion system contains far more cast iron than any other saw on the market, providing superior stability while minimizing vibration.
- Engineered for the automotive industry, the Poly-V ribbed belts can run continuously while delivering greater power transfer to the blade for better cuts.
- Our saws age well. Powder-coated cabinet resists rust and corrosion ensuring stability and long-lasting reliability.
- Massive 62mm main arbor bearing delivers long lasting performance. Look around, no one has a bearing nearly this big. It provides you with smoother performance and longer life.
- Overall saw dimensions: 44 w x 34 d x 34 h
- 69 1/4w x 36 1/2 d x 34 h (w/ optional fence & 36 rails)
- 85 1/4 w x 36 1/2 d x 34 h (w/ optional fence & 52 rails)
- Cabinet footprint: 20 w x 25 d
- Cast iron table: 24 w x 30 d, 44 w x 30 d (w/ extension wings)
- Extension wing: 10 w x 30 d
- Extension table (optional): \ 24 w x 30 d (36 rails), 40 w x 30 d (52 rails)
- Weights (may vary with motor):
- 530 lbs (table saw only)
- 635 lbs (w/ optional fence, 36 rails & table)
- 685 lbs (w/ optional fence, 52 rails & table)
- Shipping weight (approx.): 675 lbs (table saw only)
- Blade: 60-tooth, professional grade, 5/8 arbor
- Blade diameter: 10
- Blade tilt: Left
- Blade kerf: 3 mm
- Blade plate thickness: 2 mm
- Max. depth of cut, blade at 0 Degress: 3-1/8
- Max. depth of cut, blade at 45 Degrees 2-1/4
- Max. rip, right of blade: 52 1/ 2 (w/ optional 52 rails) 36 1/ 2 (w/ optional 36 rails)
- Max. rip, left of blade: 12-1/2
- Dado diameter: 8 (requires a separate brake cartridge)
- Dado max. width: 13/16"
- Arbor diameter at blade: 5/ 8
- Main bearing size: 62 mm OD x 30 mm ID
- Second bearing size: 52 mm OD x 25 mm ID
- Table in front of blade (max. elevation): 11
- Table behind blade (max. elevation): 9 3/ 4
- Arbor Runout: 0.001 Maximum Allowable Runout
- Blade Lateral Movement Over Full Elevation Range: 0.006 Maximum
- Table Flatness Measured Diagonally: 0.010 Maximum Gap
- Overall Table and Extension Wing Flatness: 0.025 Maximum Gap
- Blade Alignment with Miter Slot: 0.010 Maximum Displacement
- Deviation of Miter Gauge Indexing Stops from actual angle: 0.25o
- Alignment between Spreader and Blade: 0.010 Maximum Difference
- Miter slots: T-shaped, 3/ 4 at top, 1" at Bottom, 3/4" Deep
- Dust collection port diameter: 4"
- Riving knife / spreader thickness: 2.3 mm
- Blade guard: polycarbonate, with dust collection
- Standard Insert: zero clearance, tooless lock-down
- Dado Insert: zero-clearance, tooless lock-down
- Belts: 2 V-ribbed belts" arbor belt is static dissipative
- Hand Wheels: 8 diameter, cast iron with chrome handle
- Industrial T-Glide Fence System
- Assembly w/Rails & Table
- Cast-Iron Table And Wings
- Riving Knife
- Dust Collection Blade Guard
- Tool Free Zero-Clearance Insert
- Standard 10†Brake Cartridge
- 60 Tooth Carbide Tip Blade
Recently Viewed