This model provides the most reserve air available in an electric wheelbarrow, with a 20 Gallon ASME tank--more than twice the storage capacity of the standard twin tank. Capable of running on a 20 Amp breaker, this unit will deliver 7.3 CFM, doubling the output of many direct-drive units. Additionally, the low RPM pump and motor combine for quiet operation. Battle tested contractor tough? There's only one way to find out. Get it dirty, run it hot and don't let up - just like a contractor. That's how they're used, so that's how they're tested. Engines, pumps, motors, switches - every component of every ROLAIR compressor is battle-tested both in the field and at our Wisconsin factory. You have our guarantee that your ROLAIR compressor is ready to roll on day one, no excuses.

• Capable of running 3-4 framing guns, 3-5 roofing guns, or 7-9 trim/finish guns
• 20 Gallon ASME-certified tank more than doubles the reserve air of a standard twin tank
• Two-cylinder, high-efficiency single-stage pump includes cast iron cylinders, stainless steel reed valves, oil sight glass, oil drain extension, finned after cooler and automotive style bearing inserts
• Heavy-duty two piece 16 gauge bolted belt guard
• Includes: stop-start pressure switch, thermal overload w/manual reset, regulator and gauge set, ball valve drains, safety valve and cold-start valve and tank is not rated for California use.

• HORSE POWER-1.5 HP
• CFM DISPLACED-10.1 CFM
• CFM DELIVERED-7.3 CFM @ 90 PSI
• PUMP/MOTOR RPM-1755 RPM
• OVERLOAD PROTECTION-Yes (Manual Reset Standard)
• LUBRICATION TYPE-Splash Lubrication
• PUMP OIL CAPACITY-34 oz.
• REED VALVE SYSTEM-Yes (Standard)
• NUMBER OF CYLINDERS-2
• TANK CAPACITY-20 Gallons
• L X W X H-42"x22"x34"
• DECIBEL RATING-Unavailable
• COUNTRY OF ORIGIN-Compressor Origin.pdf
• SHIPPING WEIGHT-205 lb.
• SHIPPING DIMENSIONS (L X W X H)-47" x 23" x 39"

(1) Rolair 5520K17A 1.5 HP (115V), 7.3 CFM@90PSI, 20 Gallon ASME Compressor