Powermatic 1792020 PM2020 Short Bed Lathe
$5,099.99
Product Code: JET-1792020
Powermatic PM2020 Short Bed Lathe, 2HP 1/3PH 220V
- Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments
- Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features
- Redesigned tool rest geometry allows for better chisel movement along the tool rest
- Laser etched quill is self-ejecting.
- Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
- Attached tool caddy allows convenient access to centers, wrenches, etc.
- Tailstock has internal storage for additional accessories
- Chrome trimmed handwheels are ergonomic for a comfortable feel
- Standard Equipment:
- 2HP TEFC Motor
- Safety shield
- 3" face plate and face plate wrench
- 14" tool rest
- Multiple ball-bearing live center
- Brass tipped knockout rod
| Swing Over Bed (In.) | 20 |
| Swing Over Tool Rest Base (In.) | 17 |
| Distance Between Centers (In.) | 20 |
| Headstock Movement | Full Length of Bed |
| Spindle Taper | MT2 |
| Ram Travel Quill Travel | 4-1/2 |
| Spindle Threads (In. x TPI) | 1-1/4" x 8 TPI |
| Spindle Speeds | High 125-3200; Low 50-1200 |
| Speed Range | 50-3200 |
| Number of Indexing Positions | 48 |
| Centerline of Spindle to Floor (In.) | 44 |
| Bed Construction | Cast Iron |
| Motor Power (HP) | 2 |
| Motor Phase | 1 |
| Motor Voltage (V.) | 220 |
| Motor Current (Amps) | 6.2 |
| Recommended Circuit Size (Amps.) | 20 |
Powermatic 1792020 PM2020 Short Bed Lathe
Recently Viewed
Powermatic 1792020 PM2020 Short Bed Lathe
$5,099.99 USD
Stanley Plane 1-5/8 Iron
$9.43 USD
Klein 935DAG Digital Angle Gauge and Level
$29.97 USD
Timberline 3410 End Trimmer
$48.13 USD