Powermatic 1791320 DDS-237 Drum Sander 7.5HP
$8,599.99
Product Code: JET-1791320
Title
$8,599.99
Powermatic 1791320 DDS-237 Drum Sander 7.5HP
This is a production class Dual Drum Sander that is loaded with features. A 7.5HP motor drives the dual steel drums, which have a hard durometer rubber coating to ensure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides vibration free sanding, with plenty of storage space underneath.
- 7.5HP motor for plenty of power
- Independently adjustable rear drum for fine tuning
- Hard durometer rubber coating on steel drums provides flat, smooth finish
- Two-speed gearbox for wide range of sanding projects
- Full size cast iron table for solid support
- Forward/reverse poly conveyor belt grips stock evenly
- Dual dust ports with directional baffles for more efficient dust removal
- Standard Equipment:
- Two speed gearbox
- Dual 4" dust ports
- Style (Type) Drum
- Drum Length (In.) 37
- Number of Sanding Drums 2
- Drum Speed (RPM) 1,700
- Drum Diameter (In.) 6
- Conveyor Motor (HP) 1/4
- Conveyor Speed (FPM) 8 and 12
- Maximum Board Thickness (In.) 5-1/4
- Maximum Board Width (In.) 37
- Minimum Board Length (In.) 9
- Minimum Board Thickness (In.) 1/32
- Dust Collection Minimum CFM Required (CFM) 1,200
- Dust Port Outside Diameter (In.) Two @ 4"
- Motor Power (HP) 7-1/2
- Motor Phase 1
- Motor Voltage (V.) 230 only
- Prewired Voltage (V.) 230
- Recommended Circuit Size (Amps.) 50
(1) Powermatic 1791320 DDS-237 Drum Sander 7.5HP
Recently Viewed