The POWERMATIC DT65 Single Spindle Dovetailer gives quality to the most popular joints of drawer construction. It provides an affordable way to produce cleanly cut, professional dovetails that will enhance your products. The DT65 is complete with 1HP 230V 1 phase motor, pneumatic clamping, magnetic starter, carbide tipped cutter, and a four-sided template that produces dovetails on 1", 1-1/2", 2", and 2-1/2" centerlines. The use of different dovetail centerlines gives a unique custom appearance.

• Four centerlines - 1", 1-1/2", 2" and 2-1/2" - create a custom appearance
• Pneumatic clamping provides quick locking and unlocking of the work piece
• Eccentric spindle collet for resharpened cutters
• Spring loaded carriage makes for smooth, effortless dovetail cutting
• Cutter height of 3/16" to 3/4" accommodates different cutting depths and board thicknesses
• Extra large soft grip handle provides positive control and comfort
• The precision linear carriage bearings are sealed on both ends to eliminate dust buildup
• Visual stylus and template aid in guiding the carriage
• Material stops provide convenient positioning of the workpiece
• Cast iron and steel construction for added stability and durability

Motor Power (HP)	1
Spindle Speed (RPM)	18,500
Motor Voltage (V.)	230 V
Minimum Front Thickness (In.)	9
Maximum Front Thickness (In.)	2
Wiring Remarks
Minimum Work Piece Size (L x W)(In.)	7-7/8 x 2-3/8
Style (Type)	Pneumatic
Prewired Voltage (V.)
Maximum Work Piece Size (In.)	59 x 16-1/2
Maximum Side Thickness (In.)	1
Number of Dovetail Center Lines	3
Motor Phase	1
Table Height From Floor (In.)	45
Maximum Dovetail Height (In.)	3
Dust Collection Minimum CFM Required (CFM)	500
Minimum Dovetail Height (In.)	3
Number of Spindles	1
Dust Port Outside Diameter (In.)	2-1/2, Rear 4
Center to Center Dovetail Spacing (In.)	1, 1-1/2, 2, 2-1/2
Recommended Circuit Size (Amps.)
Minimum Side Thickness (In.)	3