Loaded with features, the 31A from Powermatic can tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the Integral Dual Dust Port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6" x 48" belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45 deg and 90 deg and the head lock allows use at any angle in-between. Removing the top guard allows contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.

• Multi-position belt head locks at any angle from 0 deg to 90 deg; includes indexing pin for 0, 45 deg, and 90 deg stops
• Belt and disc tables are precision ground cast iron with miter slots
• Belt table tilts down to 45 deg, and can be set for beveled and mitered angle sanding
• Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support
• 12" disc is balanced for flat, even coverage

Recommended Circuit Size (Amps.)
Prewired Voltage (V.)	115
Dust Collection Minimum CFM Required (CFM)	400
Disc Table Size (L x W) (In.)	17-1/4 x 9
Belt Table Size (L x W) (In.)	13-1/4 x 7-1/2
Motor Power (HP)	1-1/2
Sanding Belt Size (L x W) (In.)	48 x 6
Canister Filter (Microns)
Belt Table Tilt (Deg.)	45 Down
Disc Diameter (In.)	12
Belt Speed (RPM)	2,410
Dust Port Outside Diameter (In.)	4
Motor Voltage (V.)	115, 230
Motor Phase	115, 230
Style (Type)	Combination Belt/Disc
Motor Current (Amps)	14, 7
Impeller Diameter (In.)
Wiring Remarks	Push Button Switch
Disc Table Tilt (Deg.)	15 Up, 45 Down
Disc Speed (RPM)	2,375