Finally, a production class Dual Drum Sander that is loaded with features. This machine features a 5HP motor to power the twin poly V-belts. The dual steel drums have a hard durometer rubber coating to assure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides years of vibration free sanding, with plenty of storage space underneath.

• 5HP motor for plenty of power
• Independently adjustable rear drum for fine tuning
• Hard durometer rubber coating on steel drums provides flat, smooth finish
• Two-speed gearbox for wide range of sanding projects.
• Full size cast iron table for solid support
• Forward/reverse poly conveyor belt grips stock evenly
• Dual dust ports with directional baffles for more efficient dust removal
• Standard Equipment:
• Two speed gear box
• Dual 4" dust ports

• Style (Type) Drum
• Drum Length (In.) 25
• Number of Sanding Drums 2
• Drum Speed (RPM) 1,700
• Drum Diameter (In.) 6
• Conveyor Motor (HP) 1/4
• Conveyor Speed (FPM) 8 and 12
• Maximum Board Thickness (In.) 5-1/4
• Maximum Board Width (In.) 25
• Minimum Board Length (In.) 9
• Minimum Board Thickness (In.) 1/32
• Dust Collection Minimum CFM Required (CFM) 600
• Dust Port Outside Diameter (In.) Two @ 4"
• Motor Power (HP) 5
• Motor Phase 1
• Motor Voltage (V.) 230 only
• Prewired Voltage (V.) 230
• Wiring Remarks Magnetic Switch / Must purchase DDS237-322B for 460V operation
• Recommended Circuit Size (Amps.) 40

(1) Powermatic 1791290 DDS225 Drum Sander 5HP 1PH 230V