This 12" jointer offers big capacity and performance in a machine that is loaded with features. Large center-mounted fence assembly adjusts easily via rack and pinion system with ram lock. Preset stops on the fence body allow for fast angle set-up at 45 deg in and out, and a positive stop for perfect 90 deg angles. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also ensures the tables remain perfectly parallel even after years of tough duty. Choose either the standard three-knife cutterhead or the solid steel Helical cutterhead. The helical system makes fast work of knife changing and never needs adjustment.

• Rack and pinion adjustable cast iron fence assembly for smooth fence positioning without play
• Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
• Large 84" x 12" table surface for heavy-duty work
• Table "lips" on both sides of cutterhead aid in noise reduction
• Full size rabbeting ledge supports large workpieces for rabbets up to 3/4" deep
• 3HP motor provides plenty of power
• Standard Equipment:
• Cutterhead guard
• Heavy duty fence
• Dust port

Motor Power (HP)	3
Fence Positive Stops (Deg.)	-45, 45, 90
Rabbeting Ledge (In.)
Helical Knife Size (L x W x T) (In.)
Prewired Voltage (V.)
Cutting Capacity (W x D) (In.)	11-3/4 x 3/4
Type of Cutterhead
Size (In.)
Motor Current (Amps)
Motor Phase	1
Cuts Per Minute	15,000
Infeed Table Length (In.)
Number of Knives	3
Outfeed Table Length (In.)
Wiring Remarks
Cutterhead Diameter (In.)
Standard Knife Size (L x W x T) (In.)	12 x 1-3/16 x 1/8
Fence Tilt (Deg.)	45 Left, 45 Right
Table Size (L x W) (In.)	84 x 12
Rabbeting Capacity (In.)	"
Dust Collection Minimum CFM Required (CFM)	800
Table Height from Floor (In.)	31-1/2
Dust Port Outside Diameter (In.)	6
Fence Size (L x H) (In.)	47 x 5-1/2
Cutterhead Speed (RPM)	5,000
Recommended Circuit Size (Amps.)