The 64B table saw, with left tilt arbor, offers 1-3/4 horsepower in dual voltage to meet the demands of the professional contractor. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. An arbor lock is accessed from above the table, eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops, and extension plate for expanded workpiece support. The 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension table. The exclusive Accu-Fence system is available in 30? or 50? rip cut capacity. Storage hooks on the stand keep your accessories within reach.

• Riving knife maintains close blade proximity to reduce chance of kickback
• Micro-adjust miter gauge with extension plate offers wider crosscut support
• Blade guard and riving knife have quick release for tool-less mounting and removal
• Precision ground cast iron table and wings have beveled edge for smooth miter gauge entry
• Built-in extraction port increases dust collection efficiency
• Heavy cast iron trunnion ensures smooth blade positioning
• Chrome trimmed handwheels are ergonomically designed
• Accu-Fence locks to rail without play
• (Blade not included)

Maximum Rip Left of Blade (In.)	12
Blade Diameter (In.)	10
Table T-Slot (In.)
Motor Current (Amps)	15, 7-1/2
Weight (Lbs.)
Motor Power (HP)	1-3/4
Arbor Diameter (In.)	5/8
Table Type	cast iron
Maximum Depth of Cut at 45 Degrees (In.)	3-1/8
Wiring Remarks
Recommended Circuit Size (Amps.)
Dust Port Outside Diameter (In.)
Prewired Voltage (V.)	115
Dust Collection Minimum CFM Required (CFM)	350
Miter Gauge Type
Table Size with Extensions (In.)
Maximum Width of Dado (In.)	13/16
Distance Between Sliding Table and Blade (In.)
Style (Type)	Contractor
Maximum Rip Right of Blade (In.)	50
Maximum Diameter of Dado (In.)	8
Table Size (In.)	44-1/4 x 27
Arbor Speed (RPM)	4,000
Table Height from Floor (In.)	36
Motor Phase	1
Table in Front of Saw Blade at Maximum Depth of Cut (In.)	11-1/2
Table Size with Full Extensions (In.)
Maximum Depth of Cut (In.)	3-1/8