The 64B table saw, with left tilt arbor, offers 1-3/4 horsepower in dual voltage to meet the demands of the professional contractor. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. An arbor lock is accessed from above the table, eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops, and extension plate for expanded workpiece support. The 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension table. The exclusive Accu-Fence system is available in 30? or 50? rip cut capacity. Storage hooks on the stand keep your accessories within reach.

• Riving knife maintains close blade proximity to reduce chance of kickback
• Micro-adjust miter gauge with extension plate offers wider crosscut support
• Blade guard and riving knife have quick release for tool-less mounting and removal
• Precision ground cast iron table and wings have beveled edge for smooth miter gauge entry
• Built-in extraction port increases dust collection efficiency
• Heavy cast iron trunnion ensures smooth blade positioning
• Chrome trimmed handwheels are ergonomically designed
• Accu-Fence locks to rail without play
• (Blade not included)

Table Height from Floor (In.)	36
Recommended Circuit Size (Amps.)
Miter Gauge Type
Maximum Depth of Cut (In.)	3-1/8
Table Type	cast iron
Blade Diameter (In.)	10
Style (Type)	Contractor
Wiring Remarks
Table in Front of Saw Blade at Maximum Depth of Cut (In.)	11-1/2
Motor Phase	1
Table Size with Extensions (In.)	71-1/4 x 27
Table T-Slot (In.)
Dust Collection Minimum CFM Required (CFM)	350
Maximum Depth of Cut at 45 Degrees (In.)	3-1/8
Maximum Rip Right of Blade (In.)	30
Table Size (In.)	44-1/4 x 27
Arbor Speed (RPM)	4,000
Dust Port Outside Diameter (In.)
Weight (Lbs.)
Table Size with Full Extensions (In.)
Maximum Width of Dado (In.)	13/16
Motor Current (Amps)	15, 7-1/2
Maximum Diameter of Dado (In.)	8
Motor Power (HP)	1-3/4
Motor Voltage (V.)	115, 230
Prewired Voltage (V.)	115
Maximum Rip Left of Blade (In.)	12
Distance Between Sliding Table and Blade (In.)