This 8-inch jointer meets the demand for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73? long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The jointer is available with a three knife cutterhead, or a helical cutterhead with four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base - store them on any metallic surface for instant access.

• High-speed heat-treated steel knives
• Extra long tables are mounted on dovetailed ways, for extended workpiece support
• Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
• High mount switch for operator convenience
• Handwheel operated worm gear system for smooth fence tilting
• Magnetic push blocks can be stored on the machine within constant reach
• Non-mar fence insert protects table surface
• Large extension rest on infeed table for rabbeting

Number of Knives	3
Standard Knife Size (L x W x T) (In.)	8 x 11/16 x 1/8
Motor Voltage (V.)	230
Type of Cutterhead
Helical Knife Size (L x W x T) (In.)
Motor Phase	1
Cutterhead Diameter (In.)	3
Recommended Circuit Size (Amps.)
Fence Size (L x H) (In.)	38 x 4-3/4
Motor Power (HP)	2
Rabbeting Ledge (In.)	1/2
Motor Current (Amps)	3/8
Dust Collection Minimum CFM Required (CFM)
Cutting Capacity (W x D) (In.)	8 x 1/2
Size (In.)
Dust Port Outside Diameter (In.)	4
Wiring Remarks
Fence Tilt (Deg.)	45 Forward, 45 Backward
Prewired Voltage (V.)
Cutterhead Speed (RPM)	7,000
Fence Positive Stops (Deg.)	45 Forward, 45, 90 Backward
Table Size (L x W) (In.)	73 x 8-1/2
Infeed Table Length (In.)	35-1/4
Cuts Per Minute	21,000
Outfeed Table Length (In.)	35-1/2
Table Height from Floor (In.)	32