The 40V max XGT Brushless Cordless Hammer Driver-Drill (GPH01Z, tool only) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry. The GPH01Z is powered by a Makita-built brushless motor that delivers 1,250 in.lbs. of Max Torque, outpowering other driver-drills in heavy-load applications. It offers up to 35% faster drilling speed, compared to Makitas 18V LXT Cordless Hammer Driver-Drill (XPH07), with two speed settings (0-650 and 0-2,600 RPM and 0-9,750 and 0-39,000 BPM). An ultra-smooth variable speed trigger provides optimum control. An electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed). Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop. The GPH01Z is a workhorse tool engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. A reinforced gear housing and all-metal chuck provide additional durability. XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the competition.

• OUTPOWER: Makita-built brushless motor delivers 1,250 in.lbs. of Max Torque; out powers similar models in heavy load applications
• OUTSMART: Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
• OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh job site conditions
• Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop
• Up to 35% faster drilling speed with 2 speed settings (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM)*
• Compact length at only 7-1/8 in.; ideal for working in tight spaces
• Ultra-smooth variable speed trigger provides optimum control
• Reinforced gear housing engineered for maximum job site durability
• All-metal chuck for increased job site durability
• Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry
• The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
• The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
• XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
• XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (batteries not included)
• The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)
• The XGT Rapid Chargers digital display indicates battery charge level (-80%, +80%, 100%)
• The XGT Rapid Chargers built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
• Compatible with Makita 40V max XGT Lithium-Ion Batteries
• Only use genuine Makita Batteries and Chargers
• 3-year limited warranty
• *Compared to XPH07

• System : XGT
• Chuck Size : 1/2"
• Maximum Torque (in.lbs.) : 1,250 in.lbs.
• No Load Speed (var. 2 spd) : 0 - 650 / 0 - 2,600 RPM
• Blows Per Minute (2 speed) : 0 - 9,750 / 0 - 39,000 BPM
• Capacity (steel) : 13/16"
• Capacity (masonry) : 13/16"
• Overall Length : 7-1/8"
• Capacity (wood) : 3"
• Net Weight (with battery, sold separately) : 6 lbs.
• Shipping Weight : 5.73 lbs.
• UPC Code : 088381-894036
• UPC Code : 088381-894036

(1) Makita GPH01Z 40V max XGT Brushless Cordless 1/2 in. Hammer Driver-Drill, Tool Only