Klein 3220 Erection Wrench, 1/2 Inch Bolt
$38.99
Product Code: KLE-3220
Forged from select alloy steel, the Klein Tools 13/16-Inch Nominal Opening Spud Wrench is designed to withstand high-leverage and heavy loads. It's designed for use with 1/2-Inch bolts and U.S. regular nut types. The extra-duty head area gives maximum strength and durability. Plus, the continuous taper of the handle makes it easy to line up bolt holes.
- Forged in the USA from select US alloy steel to withstand high-leverage and heavy loads
- Extra heavy-duty head area gives maximum strength and durability
- Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding
- Extra-large hub area works on larger diameter holes better than other wrenches
- Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification
- American Bridge design
Technical Specs:
- Type Spud Wrench
- Application: Connecting Steel Members
- Special Features: Made in USA
- Overall Length: 14.75'' (37.5 cm)
- Overall Height: 1'' (2.54 cm)
- Overall Width: 2.25'' (5.7 cm)
- Material: Alloy Steel
- Finish: Black Oxide with a Rust Preventative
- Nut Type: U.S. Regular
- Square Nut Size: 1/2'' (1.3 cm)
- Nominal Opening: 13/16'' (2.1 cm)
- Head Width: 2.25'' (5.7 cm)
- Taper Diameter: 7/8'' to 3/16'' (2.2 to 0.5 cm)
- Offset Angle: 60°
- Weight: 1.4 lb (0.6 kg)
- UPC: 092644680151
Klein Tools 3220 Erection Wrench, 1/2'' Bolt, for U.S. Regular Nut (13/16'' (21 mm) nominal opening)
- Forged from select alloy steel to withstand high-leverage and heavy loads.
- Extra heavy-duty head area gives maximum strength and durability.
- Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding.
- Extra-large hub area works on larger diameter holes better than other wrenches.
- Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification.
- American Bridge design.
| Taper Diameter | 7/8'' (22 mm) to 3/16'' (5 mm) |
| Overall Length | 14-3/4'' (375 mm) |
| Head Width | 2-1/4'' (57 mm) |
| Nominal Opening | 13/16'' (21 mm) |
| Nut Type | U.S. regular |
| Bolt Size | 1/2'' (13 mm) |
| Weight (lbs.) | 1.35 |
- Always wear approved eye protection.
- Do NOT push or hammer wrench.
- Do NOT extend handle length.
- Do NOT extend handle length.
Recently Viewed