Klein Tools 1628-40VR Chicago Grip -- Dual Conductor Transmission
$1,808.87
Product Code: KLE-1628-40VR
Klein 1628-40VR Chicago Grip -- Dual Conductor Transmission-Wire Pulling GripsChicago Grips - Dual Conductor Transmission
Klein Tools 1628-40VR Chicago Grip -- Dual Conductor Transmission Features:
- Designed specifically for VR2 (vibration-resistant) and TransPowr T-2 dual conductor twisted pair cables.
- Machined upper and lower jaws eliminate scoring or damage to second conductor by contouring to second conductor.
- Round jaws shaped to provide maximum contact with circumference of cable and prevent cable deformation.
- Supplied with spring and locking loop handles, allows jaws to be held in open position for easier placement on cable.
- Grips maintain temporary tension until the wire or cable can be permanently terminated.
- Also for use on aluminum, copper, weatherproof coated wire and PVC covered conductors
- Also for use on aluminum, copper, weatherproof coated wire and PVC covered conductors
- Available in U size. Made to order sizes also available. Please call for expected delivery dates.
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code.
| Approx. Weight Each | 34 lbs. (15.4 kg) |
| Maximum Cable | 1192.5 MCM ACSR and AAC Diameter: 1.258'' (31.95) |
| Maximum Safe Load - kg | 11,340 kg |
| Minimum Cable | 1113 MCM ACSR and AAC Diameter: 1.212'' (30.75) |
| Jaw Length | 10-3/4'' (273 mm) |
| Maximum Safe Load - lbs | 25,000 lbs (11,340 kg) |
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Always match proper size and type of grip to application.
- Do not exceed rated capacity.
- Do not exceed rated capacity.
- Grips are to be used for temporary installation, not for permanent anchorage.
Recently Viewed