JET 708309 Jws-25X, JET Shaper, 3Hp, 1Ph
$2,799.99
Product Code: JET-708309
JET 708309 JWS-25X, JET Shaper, 3HP, 1PH
The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25 in.x 25-1/2 in. precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4 in. dust port.- Two-speeds let you select the best speed and torque for different cutter diameters
- Independently adjustable left and right fences, standard with a micro adjust control for precise positioning
- Large 25 X 25-1/2 precision ground cast iron table provides a durable work area
- Poly-V-belt transfers maximum power to the spindle
- Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
- Reversible spindle speeds for diverse shaping jobs
- Powerful 3HP, 1Ph motor with magnetic controls
- Starting pins for irregular shaping
- Extra large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments
- 4 Dust port built into fence for convenient hookup to any dust collection system
- Spindle lock for safe and easy cutter set up
- Spindle height scale
Specifications
| Part Number | 708309 |
| Spindle Speed | 7500 and 10,000 RPM |
| Reversable | Yes |
| Spindle Diameter | 1/2 and 3/4 " |
| Spindle Size Under Nut | 1/2 (2 13/64) and 3/4 (3 3/16) " |
| Spindle Travel | 3 |
| Tilting Spindle | n.a. |
| Table Size | 25 x 25 1/2 " |
| Table Height From Floor | 33 " |
| Table T-Slot | 3/4 x 3/8 " |
| Table Opening Diameter | 6 9/32 " |
| Table Insert Opening Diameter | 2 9/16 and 4 21/64 " |
| Fence Size (L x H) | 14 1/2 x 4 3/4 " |
| Fence Travel (Major and Minor) | 4 1/4 and 15/16 " |
| Table Inserts | 2 |
| Maximum Diameter Cutter Below Table | 6 " |
| Maximum Diameter Cutter Above Table | 7 " |
| Router Bit Collet Diameter | 1/4 and 1/2 " (optional) |
| Dust Port Outside Diameter | 4 " |
| Dust Collection Minimum CFM Required | 350 cu.ft/min |
| Electrical Controls - Magnetic Starter | Yes |
| Digital Readouts | n.a. |
| Motor Power | 3 HP |
| Motor Voltage | 230 V |
| Prewired Voltage | 230 V |
| Motor Current | 16 A |
| Motor Phase | 1 Ph |
| Model Number | JWS-25X |
| Brand | Jet |
| Height | 23 inch |
| Width | 25 inch |
| Length | 43 inch |
| Net Weight | 331 pound |
Recently Viewed