This electric all-round cutter minimises the amount of water and slurry. Unlike other electric cutters, the blade rotates forward, cutting into the material efficiently with minimum effort on the operator. K 4000 is easily adaptable for dry cutting with the Vac attachment accessory for minimal dust generation.

• Increased productivity - The new pop-up carbon brushes protects the collector from unforeseen rotor changes which increases reliability and enables longer service intervals
  
• Constant-flow water valve - The integrated regulator controls the water volume, ensuring a constant flow to the blade. It also ensures the amount of water is sufficient to bind the dust without creating an excess of water.
• Easy serviceability - The one-piece inspection lid and Torx screws make it easy to assemble and service.
• Ergonomically designed rear handle - Power cord inlet located underneath the handle enables ease of use and comfortable handling with hassle free operation.
• 14" Blade
• Cutting Depth with vacuum:4-1/2"
• Cutting Depth without vacuum:5"
• 120 volt electric motor
• Rated Current Amps: 1800
• Rated current, amps: 15
• Wire/Cable/Extenison cord Size:12AWG/50feet
• Ergonomically designed rear handle: The convenient design of the rear handle makes operation easier.
• Perfect for indoor use.
• Simple blade change: Quick acting locks for the spindle and a large outlet in the blade guard simplifies blade replacement.
• "Pulling" rotation: The blade on all of our electric cutters rotates forward, cutting into the material efficiently, minimizing the risk of sticking and kickbacks.
• A Constant-flow water valve The integrated regulator controls the water volume, ensuring a constant flow to the blade. It also ensures the amount of water is sufficient to bind the dust without creating an excess of water.
• Elgard: The advanced electronic overload protection varies the rotation speed to warn of approaching overload.
• Electronic Softstart:Provides starting with normal, slow acting fuses.
• Ergonomically designed rear handle: The convenient design of the rear handle makes operation easier.
• Generously dimensioned miter gear: Generously dimensioned miter gear provides high durability, minimal power loss and low noise levels.
• Overload protectionOur ElgardTM system protects against overload by varying the rotation speed.
• Used to cut minor adjustments to window and door opening.
• Cut building blocks, curbstone, pavers and concrete
• Use to cut grooves for expansion joints and regular cutting of floors and walls.
• Also used for deep cutting in pipe trenches

Engine:

• Rated input power- 2.4 hp
• Voltage - 100-120 V
• Frequency - 50-60 Hz

Dimensions:

• Product size width - 8.7 in
• Product size height - 12.3 in
• Weight - 16.8 lbs

Vibrations:

• Vibrations left/front handle - 3.5 m/s
• Vibrations right/rear handle - 3.5 m/s

Cutting Equipment:

• Cutting depth, max - 5 in
• Blade diameter, max - 14 in
• Arbor diameter - 1 in
• Blade thickness, max - 0.22 in
• Peripheral speed, max - 19690 fpm

Sound and Noise:

• Sound power level, guaranteed (LWA) - 105 dB(A)
• Sound pressure level at operators ear - 95 dB(A)

(1) Husqvarna 967084001 K4000 Power Cutter, Wet