Honda WSP73AA Submersible Pump

$849.00

Product Code: HON-WSP73AA

$849.00
Buy Now
Description

Honda WSP73AA Submersible Pump

Features
  • 3/4 hp, 115V submersible pump
  • 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
  • Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
  • 74 gal./min. capacity
  • Operates on continuous duty in temperatures of up to 104 deg, and intermittent duty up to 140 deg. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
  • Solids handling up to 3/8"
  • Move slurry and dirty liquids without the worry of damaging the pump.
  • Lightweight durable stainless steel casing
  • The pump wont rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
  • Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
  • If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
  • 50 foot heavy duty cord
  • SOW/ASA U.L. listed
  • Great for applications where space is tight.
  • Operates fully or partially submerged
  • Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
  • Efficient air-insulated motor
  • Oil lubricated double mechanical seals prevents damage to the seal if the pump is run dry.
Technical Specs
  • Pump Type - Submersible Standard
  • Starting Type - Automatic
  • Casing - Stainless Steel
  • Motor (HP) - 3/4
  • Voltage - 115
  • Starting amps - 48
  • Running amps - 12.2
  • Duty - Continuous
  • Motor insulation - Class F
  • Overhead protection - Built-In Thermal Automatic Reset
  • Discharge Type - Top
  • Discharge capacity - 74 gpm
  • Max. head (feet) - 54
  • Port diameter ( inches) - 1.5 FNPT
  • Maximum pressure - 23 psi
  • Solids handling - 0.375"
  • Impeller - Stainless Steel
  • Seals - Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower
  • Cord length (feet) - 50
  • Cord type - Heavy-Duty 115V
  • Dimensions (WxH) - 8.3" x 17.2"
  • Pump diameter - 8.3"
  • Dry weight - 27 lbs.
Include
(1) Honda WSP73AA Submersible Pump
Recently Viewed