Industrial Thin Kerf Double Sided Laminate/Melamine

For Ultra Long Life In Double Sided Manmade Materials

The LU96R is a thin kerf blade that is designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!

- Triple Chip Grind (TCG) Tooth Design with a negative hook angle for superior life in abrasive man-made materials

- Thin Kerf requires less power and allows for faster feed rate

Proper blade height is essential to chip-free cuts. If you experience chipping on the bottom of the material, lower the blade slightly. If there is chipping on the top of the material the blade height should be increased slightly.

Freud Perma-Shield Blade: LU96R006M20

Diameter: 160mm

Arbor: 20mm

Kerf: 0.087

Plate: 0.063

Hook Angle: -3 Degree Hook