Industrial Thin Kerf Non-Ferrous Metal Blades

Cutting Non-Ferrous Materials And Aluminum

This thin kerf heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

- Thin Kerf allows for faster feed rate and reduced waste

- Freud-Made TiCo Carbide specifically designed to cut non-ferrous metals extends tooth life

To determine if the metal you wish to cut is non-ferrous, hold the metal next to a magnet. If it attracts the magnet, it is a ferrous metal and should not be cut with a non-ferrous blade.

Freud Silver Ice Blade: LU77M012

Diameter: 12 Inches

Arbor: 1 Inches

Kerf: 0.091

Plate: 0.071

Hook Angle: -5 Degree Hook