Industrial Cabinetmaker's Crosscut Blades

Heavy-Duty Crosscutting Blades Designed For The Industrial Cabinetmaker

This heavy-duty crosscut blade is designed primarily for heavy use in a cabinetmaker's shop. Combining a 10-degree hook angle and the alternate top bevel tooth grind, this blade provides a good crosscut and long cutting life in hardwood, softwood, plywood, and chipboard. The LU73M series is ideal for cutting a wide variety of materials most commonly used by cabinet makers in thicknesses from 1/2" to 2-3/4" thick.

- Alternate Top Bevel (ATB) Tooth Design gives quality crosscuts

- Precision Tensioning with computer-controlled equipment keeps the blade flat and true while maximizing blade life and performance

When cutting on a table saw, put the finish side of your work piece facing up. When cutting with a radial arm saw or hand-held saw, put the finish side down. This will reduce splintering.

Freud Silver Ice Blade: LU73M014

Diameter: 14 Inches

Arbor: 1 Inches

Kerf: 0.138

Plate: 0.098

Hook Angle: 10 Degree Hook