The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. It's just as versatile in use as it is tremendously convenient in size. Make rip cuts of up to 11" (280 mm) cross-cut widths of up to 17-3/4" (450 mm) and bevel cuts of -10° to 47°. The unique digital operation produces results with maximum precision—accuracy within a tenth of a millimeter (1/256"). The 2x18 V dual-battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won't notice any difference compared with a corded tablesaw. Together with the UG-CSC-SYS underframe you have the perfect work table with built-in support for ripping and cross-cutting and it collapses for easy transport from the vehicle to the site. The CSC SYS 50: The ultimate in portable precision.

Incredibly compact. Extremely versatile. So compact it fits into a Systainer. Portable and precise the CSC SYS 50 cordless table saw produces shop-quality cuts on the jobsite. Impressively versatile with parallel cuts of up to 11“ (280 mm) a cross-cut width of up to 17-3/4“ (450 mm) and bevel cuts of -10° to 47°

Precise cuts at the press of a button. You can set the height and angle accurately to a tenth of a millimeter (1/256“) with unique digital operation—more exact than with any tape measure with 100% repeat accuracy. Even the most demanding cuts are a breeze with unprecedented precision. The robust guidance system is made up of a rip fence a miter gauge and sliding table.

As powerful as a corded saw. Even for rip cuts in solid wood you won‘t notice any difference in power compared with corded machines. The 2x18 V dualbattery system in combination with the brushless EC-TEC motor will impress you with maximum power and torque.

• Versatile: Parallel cuts up to 11“ (280 mm); cross cut width of up to 17-3/4“ (450 mm). Bevel cuts from -10° to 47°
• Practical: At a cutting height of up to 1-3/8“ (35 mm) through to bevel cuts down to -10°; ideal for back-beveling filler strips
• Compact and mobile: Can be easily carried with one hand and neatly stored in a Systainer format. Even easier to transport with the wheeled UG-CSC-SYS underframe
• Extreme precision: The height and bevel angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimeter (1/256“)
• Repeatable cuts are easy: The height and angle (mm and inches) are set parallax-free via the digital display i.e. more accurately than any visual judgement. Repeatable cuts are a sure thing
• Convenient: Four saw blade positions can be saved and selected via the digital display
• Highly precise rip fence: Robust rip fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results
• Highly precise angles: The miter gauge is optimally aligned and centrally clamped via a groove on the sliding table. For miter angles between -70° and +70°

Battery voltage Idle engine speed Arbor Bevel angle Cutting height 0° Cutting depth 45° Cutting height -10° Miter angle Parallel cut width Tabletop height Dust extraction connection dia. Battery capacity Weight (excluding battery) 2 x 18 V 4 500 – 6 800 RPM 3/4" (20 mm) -10 - +47 ° 0 - 1-7/8“ (0 - 48 mm) 0 - 1-11/32“ (0 - 34 mm) 13-16" - 1-1/4“ (21 - 32 mm) 0 - 70 ° 11" (280 mm) 11" (280 mm) 1-1/16" (27 mm) 1-1/16" (27 mm) 45 lb (20.2kg)

(1) HW fine-tooth saw blade W42;
(1) rip fence;
(1) push stick;
(1) miter gauge;
(1) dust collection bag;
(1) riving knife; blade guard and splitter; hex key WAF 6; SYS 18 V 2 x 5.0/TCL 6 DUO energy set; UG-CSC-SYS underframe