Dewalt Dcg405B 20V Max* Xrâ® 4.5 In. Slide Switch Small Angle Grinder With Kickback Brake (Tool Only)
$219.00
Product Code: DEW-DCG405B
This brushless small angle grinder requires no time changing brushes and offers a long motor life. Part of the PERFORM & PROTECT line of products, this grinder is equipped with Kickback Brake which engages with maximum force to stop the wheel when a pinch, stall, or bind-up is detected. Power Loss Reset prevents accidental restarts following a power disruption when the tool is left in the "on" position.
- Brushless motor requires no brush changes.
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off.
- Brake stops wheel in 2 seconds or less on average
- Power Loss Reset prevents accidental restarts following a power disruption when the tool is left in the "on" position.
E-CLUTCH / OVERLOAD PROTECTION TRUE
KICKBACK BRAKE TRUE
MAX WATTS OUT 850 W
NO LOAD SPEED 9000 RPM
SPINDLE SIZE 5/8 IN. - 11 IN
SYSTEM 20V MAX*
TOOL LENGTH 12.2 IN
TOOL WEIGHT 3.75 LBS
KICKBACK BRAKE TRUE
MAX WATTS OUT 850 W
NO LOAD SPEED 9000 RPM
SPINDLE SIZE 5/8 IN. - 11 IN
SYSTEM 20V MAX*
TOOL LENGTH 12.2 IN
TOOL WEIGHT 3.75 LBS
- DCG405 20V MAX* Grinder
- Side Handle
- Hex Key
- Inner and Outer Flange
- 4.5 in. Type 27 guard
Recently Viewed